The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery (Not included)
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
|1×iStick Pico 25 (without battery) 1×ELLO Atomizer|
|1×HW1 Single-Cylinder 0.2ohm Head 1×HW2 Dual-Cylinder 0.3ohm Head|
|1×QC USB Cable 2×User Manuals Spare Parts|
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
The iStick Pico 25 can handle various
tanks up to 25mm diameter.
With a maximum charging current of 2A, the
battery in the iStick Pico 25 can be fully charged
much more quickly.
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience.
Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
over-charging, over-current and over-discharging.
wall adapter or computer or charged with an external battery charger.